How it all began ...
Help Build The Rogue
If you find any information useful on this site, please consider a small donation to cover hosting costs, as well as materials costs for the car.
Those who have donated ...
Help Build The Rogue
Those who have donated ...
Categories
Quicksearch
Blog Administration
Tuesday, December 30. 2008
Successful CNC Computer Test
I assembled all the bits and pieces of my CNC controller computer last night and booted up Windows 2000, installed and loaded Mach3, hooked up 3 spare stepper motors I had lying around and loaded the infamous 'roadrunner' G Code... Once I tweaked the ports and pins settings in Mach3, I was able to make the steppers dance and move!
The next step is to button up all the parts, close the case and start mounting the touch-screen monitor.
The next step is to button up all the parts, close the case and start mounting the touch-screen monitor.
Comments
Display comments as
(Linear | Threaded)
No comments
The author does not allow comments to this entry
Calendar
|
April '18 | |||||
| Mon | Tue | Wed | Thu | Fri | Sat | Sun |
| 1 | ||||||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| 9 | 10 | 11 | 12 | 13 | 14 | 15 |
| 16 | 17 | 18 | 19 | 20 | 21 | 22 |
| 23 | 24 | 25 | 26 | 27 | 28 | 29 |
| 30 | ||||||
